79-86 Mustang and Capri Dash Plates


Original design, single vent Our original version holds two 5" and four 2-5/8" Auto Meter gauges and includes a bracket to attach the original vent.$250 includes shipping inside the continental US.

Original design, one vent






Two vent design, six gauge A design for two 3-3/8" and four 2-1/16" Auto Meter gauges. This design allows retention of the inboard vent opening and the use of slightly less expensive smaller gauges. Brackets are included to transfer the original vents to the MC Machine plate.$250 includes shipping inside the continental US.

Two vent design, six gauge




Two vent design, eight gauge MC Machine is pleased to present a new design for two 3-3/8" and six 2-1/16" Auto Meter gauges. This design is for the driver who needs to monitor more than just the basics and still allows retention of the inboard vent opening and the use of slightly less expensive smaller gauges. Brackets are included to transfer the original vents to the MC Machine plate.$270 includes shipping inside the continental US.

Two vent design, eight gauge




Passenger plate Long awaited passenger side plates to compliment the MC Machine gauge plates. Front plate is removable and hollowed out for the option of adding addtional gauges. Brackets are included to transfer the original vents to the MC Machine plate.$220 includes shipping inside the continental US.NOTE: If ordering a passenger plate at the same time as a gauge plate, shipping will be combined and the $20 shipping refunded.

Two vent design, eight gauge

All versions come assembled and with the main plate anodized black and the side gauges anodized grey to mimic the '83-'86 GT/RS factory plastic. Indicator lights for high beam and turn signals are also installed.

Original one vent design and two vent/six gauge are $250 including shipping inside the continental US. Two vent/eight gauge is $270 including shipping inside the continental US. For orders outside the continental US, please email for a shipping quote..



Customer images

 

Some FAQs:

Can I keep the inboard vent opening and use the 5" tach/speedo? No. There is not enough room even when using smaller 2-1/16" side gauges. The 5" speedo is so wide, any size side gauge will overlap the inboard vent. To keep the inboard vent, a 3-3/8" speedometer must be used or the side gauges eliminated.

Can I get a plate without the removable plates? Just a solid plate? A custom plate can be made in that configuration. However, installing such a plate would be difficult as access to the connections (speedo cable for example) would be tough to reach. Also, since such a custom plate would require a lot of custom changes to the CNC program, there would be no reduction in price.


 

Please be sure to read our FAQ for more information. 







While gauges made by other manufacturers may work, we have not fit them to our plates, we cannot make claims as to their fitment. We do not give instructions on installation of particular gauges. You must follow the instructions given to you by the manufacturer of your gauges.